minimum/maximum elevation and depth  usage and priority?
Dear all,
While composing a template and recommendations for the Darwin Core fields to supply for the BioFresh project http://www.freshwaterbiodiversity.eu/, similar to what Peter Desmet did for herbaria in Apple Core http://code.google.com/p/applecore/, I came across a number of terms which I haven't yet completely understood and hope to get some feedback on from this community.
The terms I am referring to are: * minimumElevationInMeters  maximumElevationInMeters http://rs.tdwg.org/dwc/terms/minimumElevationInMeters  http://rs.tdwg.org/dwc/terms/maximumElevationInMeters The lower limit of the range of elevation (altitude, usually above sea level), in meters.
* minimumDepthInMeters  maximumDepthInMeters http://rs.tdwg.org/dwc/terms/minimumDepthInMeters  http://rs.tdwg.org/dwc/terms/maximumDepthInMeters The lesser/greater depth of a range of depth below the local surface, in meters.
Both for elevation and depth there are two terms representing the minimum and maximum, which I figure are meant to provide a range. As in most cases, for point data, there will be only one elevation and depth value, I was wondering what is the recommended best practice for these terms. Should one use minimum or maximum or provide the same value for both terms?
Any advise on this would be appreciated!
With best regards,  Aaike De Wever BioFresh Science Officer Freshwater Laboratory, Royal Belgian Institute of Natural Sciences Vautierstraat 29, 1000 Brussels Belgium tel.: +32(0)2 627 43 90 mobile.: +32(0)486 28 05 93 email: aaike.dewever@naturalsciences.be skype: aaikew AIM: aaike@mac.com LinkedIn: http://be.linkedin.com/in/aaikedewever BioFresh: http://www.freshwaterbiodiversity.eu/ and http://data.freshwaterbiodiversity.eu/ Belgian Biodiversity Platform: http://www.biodiversity.be
I was all ready to contribute this remark: For trawltype sampling, these would likely be used for the trawlstart depth and trawlend depth. The implication of this kind of usage is that the sample is not, in fact, a point sample, but linear.
But I have now realized that this is a misuse of those terms (obviously start does not equal minimum, nor is there anything like "startLatitude" and "endLatitude" in Darwin Core).
How does one handle trawltype sampling (a single sample taken along a line) in a Darwin Core context?
Dean  Dean Pentcheff pentcheff@gmail.com dpentche@nhm.org
On Mon, Jul 2, 2012 at 1:46 AM, Aaike De Wever aaike.dewever@naturalsciences.be wrote:
Dear all,
While composing a template and recommendations for the Darwin Core fields to supply for the BioFresh project http://www.freshwaterbiodiversity.eu/, similar to what Peter Desmet did for herbaria in Apple Core http://code.google.com/p/applecore/, I came across a number of terms which I haven't yet completely understood and hope to get some feedback on from this community.
The terms I am referring to are:
 minimumElevationInMeters  maximumElevationInMeters
http://rs.tdwg.org/dwc/terms/minimumElevationInMeters  http://rs.tdwg.org/dwc/terms/maximumElevationInMeters The lower limit of the range of elevation (altitude, usually above sea level), in meters.
 minimumDepthInMeters  maximumDepthInMeters
http://rs.tdwg.org/dwc/terms/minimumDepthInMeters  http://rs.tdwg.org/dwc/terms/maximumDepthInMeters The lesser/greater depth of a range of depth below the local surface, in meters.
Both for elevation and depth there are two terms representing the minimum and maximum, which I figure are meant to provide a range. As in most cases, for point data, there will be only one elevation and depth value, I was wondering what is the recommended best practice for these terms. Should one use minimum or maximum or provide the same value for both terms?
Any advise on this would be appreciated!
With best regards,
Aaike De Wever BioFresh Science Officer Freshwater Laboratory, Royal Belgian Institute of Natural Sciences Vautierstraat 29, 1000 Brussels Belgium tel.: +32(0)2 627 43 90 mobile.: +32(0)486 28 05 93 email: aaike.dewever@naturalsciences.be skype: aaikew AIM: aaike@mac.com LinkedIn: http://be.linkedin.com/in/aaikedewever BioFresh: http://www.freshwaterbiodiversity.eu/ and http://data.freshwaterbiodiversity.eu/ Belgian Biodiversity Platform: http://www.biodiversity.be
tdwgcontent mailing list tdwgcontent@lists.tdwg.org http://lists.tdwg.org/mailman/listinfo/tdwgcontent
Hi Dean, all,
Selected fisheriesrelated terms such as these are handled in the OBIS schema for marine species data (http://www.iobis.org/node/304) which is an OBIS extension to Darwin Core. I do not know whether there is a move to migrate any of these extensions into DwC proper, but maybe there could be?
Regards
Tony Rees
________________________________________ From: tdwgcontentbounces@lists.tdwg.org [tdwgcontentbounces@lists.tdwg.org] On Behalf Of Dean Pentcheff [pentcheff@gmail.com] Sent: Tuesday, 3 July 2012 11:33 AM To: tdwgcontent@lists.tdwg.org Subject: Re: [tdwgcontent] minimum/maximum elevation and depth  usage and priority?
I was all ready to contribute this remark: For trawltype sampling, these would likely be used for the trawlstart depth and trawlend depth. The implication of this kind of usage is that the sample is not, in fact, a point sample, but linear.
But I have now realized that this is a misuse of those terms (obviously start does not equal minimum, nor is there anything like "startLatitude" and "endLatitude" in Darwin Core).
How does one handle trawltype sampling (a single sample taken along a line) in a Darwin Core context?
Dean  Dean Pentcheff pentcheff@gmail.com dpentche@nhm.org
On Mon, Jul 2, 2012 at 1:46 AM, Aaike De Wever aaike.dewever@naturalsciences.be wrote:
Dear all,
While composing a template and recommendations for the Darwin Core fields to supply for the BioFresh project http://www.freshwaterbiodiversity.eu/, similar to what Peter Desmet did for herbaria in Apple Core http://code.google.com/p/applecore/, I came across a number of terms which I haven't yet completely understood and hope to get some feedback on from this community.
The terms I am referring to are:
 minimumElevationInMeters  maximumElevationInMeters
http://rs.tdwg.org/dwc/terms/minimumElevationInMeters  http://rs.tdwg.org/dwc/terms/maximumElevationInMeters The lower limit of the range of elevation (altitude, usually above sea level), in meters.
 minimumDepthInMeters  maximumDepthInMeters
http://rs.tdwg.org/dwc/terms/minimumDepthInMeters  http://rs.tdwg.org/dwc/terms/maximumDepthInMeters The lesser/greater depth of a range of depth below the local surface, in meters.
Both for elevation and depth there are two terms representing the minimum and maximum, which I figure are meant to provide a range. As in most cases, for point data, there will be only one elevation and depth value, I was wondering what is the recommended best practice for these terms. Should one use minimum or maximum or provide the same value for both terms?
Any advise on this would be appreciated!
With best regards,
Aaike De Wever BioFresh Science Officer Freshwater Laboratory, Royal Belgian Institute of Natural Sciences Vautierstraat 29, 1000 Brussels Belgium tel.: +32(0)2 627 43 90 mobile.: +32(0)486 28 05 93 email: aaike.dewever@naturalsciences.be skype: aaikew AIM: aaike@mac.com LinkedIn: http://be.linkedin.com/in/aaikedewever BioFresh: http://www.freshwaterbiodiversity.eu/ and http://data.freshwaterbiodiversity.eu/ Belgian Biodiversity Platform: http://www.biodiversity.be
tdwgcontent mailing list tdwgcontent@lists.tdwg.org http://lists.tdwg.org/mailman/listinfo/tdwgcontent
_______________________________________________ tdwgcontent mailing list tdwgcontent@lists.tdwg.org http://lists.tdwg.org/mailman/listinfo/tdwgcontent
participants (3)

Aaike De Wever

Dean Pentcheff

Tony.Rees＠csiro.au